HOW TO CHOOSE A RIGHT SAW ?

Home / HOW TO CHOOSE A RIGHT SAW ?


For a quality sawing, it is necessary to choose the right tool according to:

• The work to be carried out;
• The type of material to be worked.
• The table of saws to be used according to the materials will help you to see more clearly.
• Saw: choice of a saw according to the material used

Choosing a saw makes it easy to saw with confidence.
To choose the saw best suited to your needs, consider the frequency of use of your tool.
This will allow you to choose between:

• Manual saw: occasional use for small jobs;
• A mechanical saw: frequent use (For example: cordless pole saw)
The mechanical saw is more expensive, but brings a real comfort of use.

Wood saw

Using any blade without observing the instructions may damage the saw and adversely affect the result of your work.
Noble and natural, the wood has to be processed and cut to be used for heating or construction.
The wood saw is therefore an indispensable tool.

The saw can also be used for other materials such as concrete, metals, tiles, etc.
Several types of saws make it possible to cut wood:

• Manual saw;
• Mechanical saw.

To choose the most suitable saw, it is important to consider:
• The work to be carried out;
• Or the frequency of this type of work.
The manual saw: according to the desired result
If you want to use your saw only for small indoor jobs, it is economically preferable to choose a manual saw.
Metal saw


The hacksaw is used for cutting metal or PVC.
The choice of a hacksaw depends on the hardness of the metal cut, but also on the type of work to be performed and its frequency.

The saw can also be used for other materials such as wood, concrete, tiles, etc.
Choice of a hacksaw: Depending on the use
Choose your saw to work safely.

Spark saw metal
Numerous saws are used to cut the metal.
It is important to select the right saw according to:
• The work to be carried out;
• Of its frequency.
You will have the choice between a manual saw or a mechanical saw.
Manual Hacksaw: For Small Jobs
If you want to use your saw only for small interior work, it is more economical to choose a manual saw.
You can opt for the following saws:
metal saw :
Frame saw which presents itself as a bow with screws connected to the tensioner which support a blade,
The blade must be relatively taut, at the risk of being deformed or broken,
Some models have a swiveling blade, which facilitates small beveled cuts,
Junior metal saw:
Makes it possible to reach hard-to-reach places,
Equipped with a very fine blade,
Blade holder:
Is satisfied with the minimum: a blade surmounted by a handle fixed on a single point,
Practical when working on superimposed pipes.
Hacksaw: frequent work

If you work the metal frequently, then it is best to choose a mechanical saw, which will save you time and energy.
You can choose between the following saws:
• The saber saw,
• The scroll saw,
• The band saw,
• The jigsaw.
They will of course have to be equipped with adapted blades.
Concrete Saw

The concrete saw is used for the cutting of slab, asphalt or wall construction material.
Depending on the work to be done, the saw can also be used for other materials such as wood, metals, tiles, etc.
Concrete Saw: a very hard material
Concrete saw
Concrete is a mixture of:
• cement,
• sand,
• gravel,
• water.
This gives a very hard construction material to saw.
But with new, cutting-edge technologies, some tools can work it out.
Concrete Saw: The Diamond Technique
Diamond, unequaled efficiency for concrete.
Diamond is the hardest material that can be found: it is made of carbon with a crystalline structure.
Synthetic diamonds have been developed and integrated into the sawing and cutting of tough and tough materials such as concrete.

The tool is equipped with a cutting kit which, by friction on the concrete, allows the cutting by abrasion.
There are two main techniques of diamond sawing:
• Diamond sawing,
• Sawing with diamond wire.
Concrete Saws: diamond sawing
There are several ways to saw with a diamond disc:
• The circular saw equipped with a diamond disc:
Allows the sawing of concrete plates at a cutting depth of approximately 120 mm,
The circular saw is lighter and more manageable than many other concrete sawing machines,
• The ground saw:
For cutting screed or for making expansion joints,
Sawing depth up to 50 cm,
The ground saws may be thermal or electric,
• The wall saw:
Guided rail cutting system,
The saw head comprises a motorized arm on a chassis and can be equipped with a diamond disk,
Hydraulic or electric motorization according to the cutting power requirements,
Diameter of the discs from 600 mm to 1 500 mm.

Leave a Reply

Your email address will not be published. Required fields are marked *