How to Charge a Car Battery with Jump Starter ?
You’ll start your vehicle, and suddenly it does not work. What is the problem? The battery has been discharged and will not start as much as you want. If not in a hurry you can change the battery or call the crane to revive your battery, but if you have to go somewhere you’re going to play how to load a car battery.
This article shows you how to restore the vehicle battery at home without having to wait for anyone to do it for you in 5 steps. It’s easy, free and you can take the time to do so is not even 30 minutes.
• Game cable clamps: to connect the battery discharged to one that is charged. Note that is of a certain thickness if they are too thin will not work.
• Jump starter: it is not a tool, but it is essential to charge the battery. View best portable jump starter reviews
1. Get a car with charged battery or a battery charger
You need an element to charge the battery of your vehicle. It may be another vehicle with charged battery or car battery charger, which is less common and probably will not have on hand.
If the vehicle has some battery, it may be enough to push several people, accelerate and keep the car running for 20 minutes to charge the battery. However, if the vehicle battery is dead, this will not help you at all.
2. Connect the battery clamps charged to the discharged
Open the hood of both cars and locate the battery and proceeds to connect the set of tweezers. First, you have to put the clamps on red wires to the active terminals.
Subsequently, connects one clamp of the black cable to the negative terminal of the battery charged and one of them to the battery. Be careful when connecting the negative terminals as it could jump a spark.
3. Start the car with the battery charged
After correctly connecting the batteries, you have to initiate the car with the battery charged. Accelerates and leave the vehicle running at about 2,000 rpm for work that costs less to start the car unloaded.
4. Start the car with the flat battery
After spending a time of 5 minutes, try to initiate the vehicle that had the flat battery. If you launch the first, let it go on and removing theclamps have placed batteries in the reverse order that we have set. That is, you should first remove the negative terminal of the discharged battery, then the charged and subsequently the two red wires to the positive terminals.
5. Leave in the car for 20 minutes
To charge the battery must exit the car on and run for 20 minutes. This time, the battery is charged and can re-use the car to go anywhere.
Alternatives to recharge the vehicle battery
As we also start the car battery charging it with another vehicle, you can also try other methods commented: use a battery charger or push the vehicle and try to start it moving.
When using a battery charger, the process would be like replacing the other car for that magazine. The price of these boots is between 30 and 120 euros, depending on the brand and type they are. The smaller and lighter, are more expensive.
If you start pushing the car, remember to turn off all accessories and try to do downhill to facilitate the task. The more speed takes the easiest car will boot.
And if it does not start?
If after several attempts the starter motor has no power to initiate the car (or do not even try), I check if any of the tweezers is released or not make good electrical contact.
Try again, but if the problem persists is most likely need to change the battery for another. You may also be another element of the electric starter car … but then no choice but to visit a mechanic check the electrical starting circuit and the circuit of the spark plugs.
What if it turns to download immediately?
It is likely to miss distilled water glasses, or the battery is already worn or “sulfated” for having reached the end of its useful life. If after filling the vessel with distilled water and walk a few kilometers retain the battery still does not charge, then it is best to replace it with a new or try to apply a full charge using a battery charger.
Also if we have a backup battery stored in the garage and always maintain full load, we can replace it in the car for which it is discharged, or also connect via a bridge to the car battery that has removed, using cable set connection to which reference has been made and following the steps outlined above. So it may not be necessary to use a second car.